The salt-water injection well was cleaned of formation damage due to fines and sludge, resulting in an increase in the injection rate of 175% while reducing CO2 emissions. The oil production of the field also increased.

The BaSO4 scale was removed from the sand screens by BLUESPARK®, resulting in an increase in oil production of 175%

The SCSSSV scale was removed by BLUESPARK®, resulting in a successful inflow test and no need for an insert valve

BLUESPARK® stimulation to improve connectivity to the reservoir by clearing out blockages resulted in a 3x increase in oil production with the job completed in less than 3 days.

Instantaneous reduction in injection pressure by 55%, and an injection rate increase by 1,260% after BlueSpark® treatment.

The aggregate oil production for the first 30-days averaged 324 BOPD, up 970% from the pre-BLUESPARK® aggregate of 30.3 BOPD, including one well (Well #4) that had zero production pre-treatment.

A 60% aggregate increase in oil production for two wells was completed in less than two days.

An increase in control line returns was noted after the first BLUESPARK® run, indicating the flow tube and flapper were reactivated. A successful inflow test was performed on the SSSV after the 2nd run.